Description
Transit Passenger Side Sliding Door - Sliding Window | VWD SE-Series TR201-SE (2015-2026)
The VWD TR201-SE is a half-slider window designed for the Ford Transit passenger-side sliding door. Solar privacy glass (12% UV) and a built-in bug screen help keep the interior comfortable. A secure latch and urethane-bonded installation finish the installation with a sealed, factory-style look.

Key Features
- Half slider window for controlled airflow
- Solar privacy glass (12% UV)
- Passenger side sliding door position for Ford Transit
- Built-in bug screen
- Secure latch system
- Urethane-bonded installation
- 1-year warranty
Fitment
- Vehicle: Ford Transit Van
- Years: 2015-2026
- Roof: Medium Roof or High Roof
- Wheelbase: 130 in, 148 in, 148 in Extended
- Position: Passenger Side Sliding Door
Technical Specifications
| Model | TR201-SE |
| Window Type | Half Slider |
| Overall Dimensions | 53.82 in x 29.17 in (1367 mm x 741 mm) |
| Slider Opening | 14.57 in × 20.08 in (370 mm x 510 mm) |
| Glass | Solar Privacy Glass (12% UV) |
| Screen | Built-in bug screen |
| Installation | Urethane Bonded |
| Warranty | 1 Year |
Installation
This is a urethane-bonded window. Prep the cutout, dry-fit, clean, prime, and set with automotive glass urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.
Ford Transit TR201 Installation Overview
Installing the TR201 passenger-side sliding door windows requires removing a portion of the inner stamped sheet metal on Ford Transit Medium Roof and High Roof vans.
This installation overview applies to:
- TR201-AW – Premium Awning Window
- TR201-F – Fixed Glass Window
- TR201-SE – SE-Series Sliding Window
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the sliding door.
- Pay special attention to the upper front corner where the Transit door has a triangular stamped protrusion.
- Cut that upper front corner slightly smaller so the Trim-Lok edge molding and finished trim can fully seat without interference.
- File and deburr the cut edges to remove any sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Dry-fit the window and verify clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual window and vehicle before cutting. The illustrated cut lines in our guide are for visual reference, not an exact cutting template.
FAQ
What vehicles does this window fit?
Ford Transit 2015-2026, Medium Roof or High Roof, wheelbase 130 in, 148 in, 148 in Extended, passenger side sliding door location.
What are the measurements?
Overall: 53.82 in x 29.17 in (1367 mm x 741 mm). Slider opening: 13.0 in x 15.9 in (330 mm x 403 mm).
What tint is used?
Solar privacy glass with a 12% UV rating.
How is it installed?
Urethane-bonded installation.
Ford Transit Van
| Model | Transit Van |
|---|---|
| Wheelbase | 130", 148", 148" Extended |
| Model Years | 2015–2026 |
| Roof Height | Medium Roof or High Roof |
Compatible with Ford Transit vans within the configurations listed above.