Transit Driver Side Rear Quarter SE-Series Sliding Window (148 WB) | VWD TL204-SE

Factory-style all-glass appearance with functional ventilation. The VWD TL204-SE SE-Series sliding window is designed for the Ford Transit driver's side rear quarter on 148" wheelbase vans. Grey solar privacy glass, a secure sliding vent, and a clean urethane-bonded installation provide fresh airflow while maintaining a sleek OE-style exterior appearance.

Key Features

• VWD SE-Series sliding van window with functional ventilation
• Sleek all-glass OE-style exterior appearance
• Position: driver side rear quarter
• Fitment: Ford Transit 148" wheelbase
• Sliding vent opening for adjustable fresh airflow
• Secure latch system
• Grey solar privacy glass
• 12% UV filter rating helps reduce heat and UV exposure
• Tempered automotive safety glass (DOT/SAE)
• Urethane-bonded installation for a sealed, factory-style finish
• Usually ships in 5 days or less
• 1-year warranty

Fitment

• Vehicle: Ford Transit Van
• Window position: Driver Side Rear Quarter
• Wheelbase: 148" Standard
• Model years: 2015–2026
• Roof height: Medium Roof or High Roof

Important Fitment Note: This window will not work with Ford Transit vans equipped with rear air conditioning components or factory plastic interior walls/panels that extend into or occupy the window pocket. Inspect the window pocket and interior wall configuration before ordering or cutting.

Technical Specifications

Measurements

Overall Dimensions: 668 mm x 712 mm (26.30" W x 28.03" H)

Slider Opening: 171.45 mm x 374.65 mm (6.75" W x 14.75" H)

Installation

This is a urethane-bonded window. Dry-fit the window before installation and verify that the window pocket is free of rear air conditioning components, factory plastic walls, panels, or other obstructions. Prep the opening, treat the cut edge, clean, and prime according to the automotive urethane manufacturer's specifications. Set the window with automotive glass urethane, then tape and support the window during the curing process. Do not drive the vehicle until the urethane has cured according to the urethane manufacturer's specifications.

Important Fitment Restrictions

Before ordering or installation, inspect the driver's side rear quarter window pocket. The TL204-SE is not compatible with vans that have rear air conditioning equipment or factory plastic interior walls/panels located within the window pocket. These components may interfere with the sliding window assembly and prevent proper installation or operation.

FAQ

What vehicles and position does the TL204-SE fit?

The VWD TL204-SE fits the driver's side rear quarter position of 2015–2026 Ford Transit vans with the 148" standard wheelbase and Medium Roof or High Roof configuration.

Is the TL204-SE a fixed window or sliding window?

The TL204-SE is a VWD SE-Series sliding van window. It combines an all-glass OE-style exterior appearance with a functional sliding vent for adjustable airflow.

What are the TL204-SE window measurements?

Overall dimensions are 668 mm x 712 mm (26.30" W x 28.03" H).

What is the sliding window opening size?

The slider opening measures approximately 171.45 mm wide x 374.65 mm high (6.75" W x 14.75" H).

Will the TL204-SE work with rear air conditioning?

No. This window will not work with vans that have rear air conditioning components located within or obstructing the driver's side rear quarter window pocket.

Will this window work with factory plastic interior walls?

Not if the factory plastic wall or interior panel extends into or occupies the window pocket. The window pocket must provide adequate clearance for the TL204-SE sliding window assembly.

What glass and UV rating does it use?

The TL204-SE uses grey solar privacy glass with a 12% UV filter rating.

Is the glass safety-rated?

Yes. The TL204-SE uses tempered automotive safety glass meeting DOT/SAE requirements.

How is the TL204-SE installed?

The window uses a urethane-bonded installation. Dry-fit the window first, prepare and treat the opening, clean and prime according to urethane specifications, set the window with automotive glass urethane, and support it during the curing period.