Description
Sprinter Driver Side Forward Awning Window | VWD Premium SL101-AW (2007-2026 Low & High Roof)
The VWD Premium SL101-AW is built for the Sprinter driver side forward panel, the spot that controls bed-area airflow. You get rain-safe ventilation, solar privacy glass, an integrated bug screen, and an OEM all-glass exterior look. Urethane bonded install for a sealed, factory-style finish.

Key Features
- Premium awning vent window for all-weather airflow
- Solar privacy glass
- Driver side forward position for Mercedes-Benz Sprinter
- Integrated bug screen
- OEM all-glass exterior appearance
- Urethane bonded installation
- 1 year warranty
Fitment
- Vehicle: Mercedes-Benz Sprinter Van
- Years: 2007-2026
- Roof: Low roof or high roof
- Wheelbase: 144 or 170
- Position: Driver Side Forward panel
Technical Specifications
| Model | SL101-AW |
| Window Type | Premium Awning Vent Window |
| Overall Dimensions | 55.20 in x 30.6 in (1402 mm x 777 mm) |
| Opening Dimensions | 35.83 in x 18.90 in (910 mm x 480 mm) |
| Internal Frame Depth | 2 9/16 in (65 mm) |
| Glass | Solar Privacy Glass |
| Screen | Integrated Bug Screen |
| Installation | Urethane Bonded |
| Warranty | 1 Year |
Installation
This is a urethane bonded window. Prep the cutout, dry-fit, clean, prime, and set with automotive glass urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer specs.
Mercedes Sprinter SL101 Installation Overview
Installation of the SL101 driver-side forward windows requires removal of a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SL101-AW – Premium Awning Window
- SL101-CA – Crank-Out Awning Window
- SL101-DS – Double-Sliding Window
- SL101-F – Fixed Glass Window
- SL101-SE – SE-Series Sliding Window
- SL101-SER – Rear-Opening Sliding Window
- 2007–2026 Mercedes-Benz Sprinter
- Driver Side Forward Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the van when possible.
- File and deburr the cut edges to remove any sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the wall cavity.
- Dry-fit the actual SL101 window and verify complete clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual Sprinter configuration, wheelbase, and exact SL101 window before cutting. The illustrated cut area is intended as a visual reference and not as an exact cutting template.
FAQ
What vehicles does this window fit?
Mercedes-Benz Sprinter Van 2007-2026, 144 or 170 wheelbase, low roof or high roof, driver side forward panel position.
What are the measurements?
Overall: 55.20 in x 30.6 in (1402 mm x 777 mm). Opening: 35.83 in x 18.90 in (910 mm x 480 mm). Internal frame depth: 2 9/16 in (65 mm).
What tint is used?
Automotive solar privacy glass.
How is it installed?
Urethane bonded installation.
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 144" or 170" |
| Model Years | 2007–2026 |
| Roof Height | Low Roof or High Roof |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.