Description
Sprinter 170 Double Sliding Van Window (Driver Side Rear Quarter) | VWD SL103-DS
Dual sliders. Built-in screen. Built-in shade. Clean exterior look.
Key Features
- Double sliding ventilation. Open front, rear, or both
- Integrated retractable bug screen
- Built-in privacy shade with UV barrier
- Solar privacy-tinted tempered glass (17% UV transmission)
- Direct-fit for Sprinter 170 WB driver side rear quarter
- Urethane-bonded installation for a watertight finish
- Usually ships in 5 days or less
- Warranty: 1 year
Fitment
- Vehicle: Mercedes-Benz Sprinter Van
- Wheelbase: 170"
- Model years: 2007–2026
- Roof height: Low Roof or High Roof
- Window position: Driver Side Rear Quarter
Technical Specifications
| SKU | SL103-DS |
| Window Type | VWD Double Sliding Van Window |
| Glass | Tempered Safety Glass with Solar Privacy Tint (17% UV transmission) |
| Screen | Integrated Retractable Bug Screen |
| Shade | Built-in Privacy Shade with UV Barrier |
| Installation Type | Urethane Bonded |
| Country of Manufacture | China |
| Warranty | 1 Year |
Measurements
Overall Size: 1290mm x 768mm (50.78" x 30.23")
Screen/Shade Opening: 789mm x 360mm (31.06" x 14.17")
Internal Frame Depth: 65mm (2 9/16")
Installation
This window is urethane-bonded. Dry-fit first. Confirm measurements before cutting. Prep and prime per urethane requirements. Apply a continuous urethane bead. Set the window, tape it in place, and allow full cure time. Do not drive until urethane is fully cured.
Mercedes Sprinter SL103 Installation Overview
Installing the SL103 driver-side rear quarter windows requires removing a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SL103-AW – Premium Awning Window
- SL103-CA – Crank-Out Awning Window
- SL103-F – Fixed Glass Window
- SL103-DS – Double-Sliding Window
- Driver Side Rear Quarter Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the van when possible.
- File and deburr the cut edges to remove any sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the rear quarter cavity.
- Dry-fit the actual SL103 window and verify clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the exact SL103 model, Sprinter configuration, and actual vehicle before cutting. The illustrated cut area is a visual reference, not an exact cutting template.
Explore Related Categories
- Sliding Van Windows
- Awning Van Windows
- Fixed Glass Van Windows
- T-Vent Van Windows
- Universal / Bunk Van Windows
- Installation Accessories
- Window Installation Instructions
FAQ
What van does the SL103-DS fit?
Mercedes-Benz Sprinter 170 wheelbase (2007–2026), driver's side rear quarter. Low roof or high roof.
What are the SL103-DS measurements?
Overall: 1290mm x 768mm (50.78" x 30.23"). Screen/shade opening: 789mm x 360mm (31.06" x 14.17"). Internal frame depth: 65mm (2 9/16").
Does it include a screen and privacy shade?
Yes. It includes an integrated retractable bug screen and a built-in privacy shade.
How does the double sliding ventilation work?
Two independently sliding glass panels let you open the front, the rear, or both so you can control airflow for your layout and weather.
How is SL103-DS installed?
Urethane-bonded installation. Dry-fit first, prep and prime the opening, apply a continuous automotive urethane bead, set the window, and allow full cure per the urethane manufacturer's specifications.
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 170" |
| Model Years | 2007–2026 |
| Roof Height | Low Roof or High Roof |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.
