Description
Sprinter Passenger Side Sliding Door Crank-Out Awning Window | VWD SR101-CA (2007-2026)
The VWD SR101-CA is the crank-out awning upgrade for the Sprinter passenger-side sliding door. You get controlled airflow without the wide-open look of a large slider. Solar privacy glass with a 17% UV rating helps keep the cabin cooler and more private. The crank-out awning opens up to 3 inches for precise fresh-air control.

Key Features
- Direct-fit for the Sprinter passenger side sliding door
- Crank-out awning ventilation with stable open positions
- Opens up to 76mm (3 in) for airflow control
- Solar privacy glass with 17% UV rating
- Removable fiberglass bug screen
- Low-profile exterior appearance
- Urethane-bonded installation
- Manufactured in China
- 1-year warranty
Fitment
- Mercedes-Benz Sprinter 2007-2026
- 144, 170, and 170 EXT wheelbases
- Low Roof and High Roof
- Position: Passenger Side Sliding Door
Technical Specifications
| Model | SR101-CA |
| Window Type | Crank-Out Awning |
| Overall Size | 1402 mm x 777 mm (55.20 in x 30.6 in) |
| Awning Opening | 803 mm x 450 mm (31.61 in x 17.72 in) |
| Crank-Out Distance | Up to 76 mm (3 in) |
| Glass | Solar Privacy Glass |
| UV Rating | 17% |
| Screen | Removable fiberglass bug screen |
| Window Position | Passenger Side Sliding Door |
| Installation | Urethane Bonded |
| Manufactured In | China |
| Warranty | 1 Year |
Installation
This is a urethane-bonded window. Prep the cutout, dry-fit, clean, prime, and set with automotive glass urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.
Mercedes Sprinter SR101 Installation Overview
Installation of the SR101 passenger side sliding door windows requires removal of a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SR101-AW – Premium Awning Window
- SR101-CA – Crank-Out Awning Window
- SR101-DS – Double-Sliding Window
- SR101-F – Fixed Glass Window
- SR101-SE – SE-Series Sliding Window
- SR101-SER – Rear-Opening Sliding Window
- 2007–2026 Mercedes-Benz Sprinter
- 144" or 170" Wheelbase
- Low Roof or High Roof
- Passenger Side Sliding Door Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the sliding door when possible.
- File and deburr the cut edges so there are no sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the sliding door cavity.
- Dry-fit the actual SR101 window and verify complete clearance before applying automotive urethane.
- Verify sliding-door clearance and travel where aftermarket flares, capsules, or other exterior accessories are present.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual Sprinter configuration and exact SR101 window before cutting. The illustrated cut area is intended as a visual reference and not as an exact cutting template.
FAQ
What vehicles does this window fit?
Mercedes-Benz Sprinter 2007-2026, 144, 170, and 170 EXT wheelbases, Low Roof and High Roof. Passenger Side Sliding Door.
What are the measurements?
Overall size: 1402 mm x 777 mm (55.20 in x 30.6 in). Awning opening: 803 mm x 450 mm (31.61 in x 17.72 in). Crank-out distance: up to 76 mm (3 in).
Can it stay open in the rain?
Yes. The bottom-hinged awning design helps shield the opening from direct rainfall while allowing ventilation.
Does it include a screen?
Yes. It includes a removable fiberglass bug screen for pest-free airflow.
How is it installed?
Urethane-bonded installation using automotive glass urethane.
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 144" or 170" |
| Model Years | 2007–2026 |
| Roof Height | Low Roof or High Roof |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.