Description
Trim-Lok Edge Molding for 2014–2026 RAM ProMaster Passenger Side Rear Quarter Window Opening - 136" Wheelbase
Finish your van window installation with a clean, professional appearance using this Trim-Lok Edge Molding for the 2014–2026 RAM ProMaster 136" Wheelbase passenger side rear quarter window opening. This black textured edge trim is supplied in a 12 ft length and is specifically sized to cover the exposed sheet metal edge created when cutting the van body for a urethane-bonded window installation.
While edge molding is not required for a window installation, it is one of the most popular finishing accessories used by professional van upfitters, camper van builders, and DIY installers. The trim helps conceal exposed metal, rough cuts, paint imperfections, and uneven cut lines while creating a cleaner transition between the van wall and the installed window.
Important: Edge molding is designed to be installed before the window is installed. Once a urethane-bonded window has been bonded into place, access to the cut edge is largely blocked, making installation of the molding extremely difficult without removing the window. For best results, install the edge molding immediately after completing the cutout and before applying urethane or setting the glass.
Product Details
- Vehicle Fitment: 2014–2026 RAM ProMaster
- Wheelbase: 136"
- Position: Passenger Side Rear Quarter
- Length: 12 ft
- Grip Range: 1/8"
- Color: Black
- Finish: Textured
- Material: Flexible PVC Edge Trim
- UV Resistant: Yes
- Weather Resistant: Yes
- Installation Type: Push-On Edge Molding
- Application: Covers exposed cut edges after creating a window opening
Designed for Van Window Installations
This Trim-Lok edge molding is designed to cap over the exposed metal edge created when cutting the van wall for an aftermarket window. The flexible design covers both the inner and outer wall skins of the ProMaster body structure, helping create a cleaner, more professional appearance around the window opening.
- Covers exposed sheet metal cut edges
- Improves the appearance of window installations
- Helps hide rough cuts and minor imperfections
- Reduces visibility of bare metal around the opening
- Creates a cleaner finished look inside the van
- Ideal for camper van, cargo van, and commercial van conversions
Installation Notes
Trim-Lok edge molding simply presses onto the cut edge of the sheet metal opening. Because it is designed to cover the cut edge itself, installation should be completed prior to setting the window into the opening.
In some installations, adhesive foam or insulation material may extend too close to the cut edge. Trimming that material back slightly can help the molding seat properly and provide a cleaner finished appearance.
Minor trimming may be required depending on cutout dimensions and installation techniques. Always test fit before final installation.
Why Use Trim-Lok Edge Molding?
Whether you're installing fixed glass, sliding windows, awning windows, bunk windows, or custom camper van windows, Trim-Lok edge molding provides an easy and affordable way to create a more professional-looking installation. It is commonly used by camper van builders, conversion companies, RV manufacturers, and DIY van enthusiasts throughout North America.
