Description
Trim-Lok Edge Molding for 2014–2026 RAM ProMaster Driver Side Rear Quarter Window Opening - 159" EXT Wheelbase
Finish your van window installation with a clean, professional appearance using this Trim-Lok Edge Molding for the 2014–2026 RAM ProMaster 159" Extended Wheelbase driver side rear quarter window opening. This black textured edge trim is supplied in a 12 ft length and is specifically designed to cover the exposed sheet metal edge created when cutting the van body for a urethane-bonded window installation. :contentReference[oaicite:0]{index=0}
While edge molding is not required for a successful window installation, it is one of the most popular finishing accessories used by professional van upfitters, camper van builders, and DIY installers. The molding helps conceal exposed metal, rough cuts, paint imperfections, and uneven cut lines while creating a cleaner transition between the van wall and the installed window. The Trim-Lok profile is sized to fit over both the inner and outer metal wall skins, providing a clean, finished interior appearance. :contentReference[oaicite:1]{index=1}
The flexible PVC construction is designed to withstand UV exposure, temperature changes, and harsh weather conditions while maintaining a professional appearance for years to come. Whether you're building a camper van, work van, adventure van, or commercial fleet vehicle, edge molding is a simple upgrade that can dramatically improve the finished look of your installation. :contentReference[oaicite:2]{index=2}
Important: Edge molding is intended to be installed before the window is bonded into place. Because the trim covers the cut edge itself, installation becomes extremely difficult after a urethane-bonded window has been installed. For best results, install the molding immediately after completing the cutout and prior to applying urethane or setting the glass.
Product Details
- Vehicle Fitment: 2014–2026 RAM ProMaster
- Wheelbase: 159" Extended (EXT)
- Position: Driver Side Rear Quarter
- Length: 12 ft
- Grip Range: 1/8"
- Color: Black
- Finish: Textured
- Material: Flexible PVC Edge Trim
- UV Resistant: Yes
- Weather Resistant: Yes
- Installation Type: Push-On Edge Molding
- Application: Covers exposed cut edges before window installation
Designed for ProMaster Window Installations
This Trim-Lok edge molding is designed to cap over the exposed metal edge created when cutting the driver side rear quarter panel for an aftermarket window installation. The flexible design covers both the inner and outer wall skins, helping create a cleaner and more professional appearance around the window opening.
- Covers exposed sheet metal cut edges
- Improves the appearance of window installations
- Helps hide rough cuts and minor imperfections
- Reduces visibility of bare metal around the opening
- Creates a cleaner finished look inside the van
- Ideal for camper vans, cargo vans, adventure vans, and commercial vehicle conversions
Installation Notes
Trim-Lok edge molding simply presses onto the cut edge of the sheet metal opening. Since the molding is designed to cover the cut edge itself, installation should be completed before the window is installed.
In some applications, adhesive foam used around urethane-bonded windows may extend too close to the cut edge. Trimming the foam back slightly can help the molding seat properly and provide a cleaner finished appearance.
Minor trimming may be required depending on cutout dimensions and installation methods. Always test fit prior to final installation.
Why Use Trim-Lok Edge Molding?
Whether you're installing fixed glass, sliding windows, awning windows, bunk windows, or custom camper van windows, Trim-Lok edge molding provides an easy and affordable way to create a more professional-looking installation. It is commonly used by van conversion companies, RV builders, commercial upfitters, and DIY ProMaster builders throughout North America.
