Description
Sprinter Driver Side Rear Quarter Fixed Glass Window (144 WB) | VWD SL104-F
Factory look. Solid fixed glass. Direct-fit for the Sprinter driver's side rear quarter on 144 wheelbase vans. Grey solar privacy glass for cleaner visibility with real privacy.
Key Features
- Solid fixed glass OE-style window
- Position: driver side rear quarter
- Fitment: Mercedes Sprinter 144" wheelbase
- Grey solar privacy glass
- 17% UV filter rating helps reduce heat and UV exposure
- Tempered automotive safety glass (DOT/SAE)
- Urethane-bonded installation for a sealed, factory-style finish
- Note: not compatible with the driver-side sliding door
- Usually ships in 5 days or less
- 1-year warranty
Fitment
- Vehicle: Mercedes-Benz Sprinter Van
- Window position: Driver Side Rear Quarter
- Wheelbase: 144"
- Model years: 2007–2026
- Roof height: Low Roof or High Roof
Technical Specifications
| SKU | SL104-F |
| Window Type | Solid Fixed Glass OE Style Van Window |
| Vehicle | Mercedes-Benz Sprinter Van |
| Window Position | Driver Side Rear Quarter |
| Wheelbase | 144" |
| Model Years | 2007–2026 |
| Roof Height | Low Roof or High Roof |
| Glass | Grey Solar Privacy Glass |
| UV Filter Rating | 17% |
| Safety | Tempered Automotive Safety Glass (DOT/SAE) |
| Installation | Urethane Bonded |
| Warranty | 1 Year |
| Notes | Not compatible with the driver-side sliding door |
Measurements
Overall Dimensions: 1631mm x 768mm (64.21" x 30.24")
Installation
This is a urethane-bonded window. Dry-fit first. Prep the opening, treat the cut edge, clean, and prime per urethane specs. Set the window with automotive urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.
Mercedes Sprinter SL104 Installation Overview
Installation of the SL104 driver side rear quarter windows requires removal of a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SL104-AW – Premium Awning Window
- SL104-F – Fixed Glass Window
- SL104-SE – SE-Series Sliding Window
- SL104-DS – Double-Sliding Window
- 2007–2026 Mercedes-Benz Sprinter
- 144" Wheelbase
- Low Roof or High Roof
- Driver Side Rear Quarter Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the van when possible.
- File and deburr the cut edges so there are no sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the rear quarter cavity.
- Dry-fit the actual SL104 window and verify complete clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: SL104 windows are for the 144" wheelbase driver side rear quarter position and will not work with a driver side sliding door. Always verify the actual van configuration and exact window before cutting.
FAQ
What vehicles and positions does SL104-F fit?
Mercedes-Benz Sprinter van. Position: driver's side rear quarter. Fitment listed for 2007–2026 Sprinter vans with 144" wheelbase and low roof or high roof.
What are the measurements?
Overall dimensions: 1631 mm x 768 mm (64.21 in x 30.24 in).
What glass and UV rating does it use?
Grey solar privacy glass with a 17% UV filter rating.
Is this compatible with the driver-side sliding door?
No. This window is for the driver-side rear quarter on 144 wheelbase models and is not compatible with the driver-side sliding door position.
How is it installed?
Urethane-bonded installation using automotive glass urethane. Prep and prime per urethane specs, set the glass, and support during cure.
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 144" |
| Model Years | 2007–2026 |
| Roof Height | Low Roof or High Roof |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.
