Description
Sprinter Passenger Side Sliding Door Awning Window | VWD Premium SR101-AW (2007-2026 Low & High Roof)
The VWD Premium SR101-AW is built for the Sprinter passenger side sliding door, the main living area panel. You get rain-safe ventilation, solar privacy glass (17% UV), and a retractable screen and shade system for comfort and control. OEM all-glass exterior look. Urethane bonded install for a sealed, factory-style finish.

Key Features
- Premium awning vent window for all-weather airflow
- Solar privacy glass (17% UV rating, blocks 83% UV)
- Passenger side sliding door position for Mercedes-Benz Sprinter
- Integrated retractable bug screen
- Integrated pleated retractable shade
- OEM all-glass exterior appearance
- Urethane bonded installation
- Manufactured in China
- 1-year warranty
Fitment
- Vehicle: Mercedes-Benz Sprinter Van
- Years: 2007-2026
- Roof: Low roof or high roof
- Wheelbase: 144 or 170
- Position: Passenger Side Sliding Door
- Compatibility Note: This product may not work with some flares, capsules, or bump-outs without additional products or modifications, such as track spacers or door extenders. The SR101-F, SR101-SE, SR101-SER, and SR101-SES are designed as out-of-the-box options.
Technical Specifications
| Model | SR101-AW |
| Window Type | Premium Awning Vent Window |
| Overall Dimensions | 55.20 in x 30.6 in (1402 mm x 777 mm) |
| Awning Vent Opening | 35.83 in x 18.90 in (910 mm x 480 mm) |
| Internal Frame Depth | 2 9/16 in (65 mm) |
| Glass | Solar Privacy Glass (17% UV rating, blocks 83% UV) |
| Screen | Integrated Retractable Bug Screen |
| Shade | Integrated Pleated Retractable Shade |
| Installation | Urethane Bonded |
| Manufactured In | China |
| Warranty | 1 Year |
Installation
This is a urethane-bonded window. Prep the cutout, dry-fit, clean, prime, and set with automotive glass urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.
Mercedes Sprinter SR101 Installation Overview
Installing the SR101 passenger-side sliding door windows requires removing a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SR101-AW – Premium Awning Window
- SR101-CA – Crank-Out Awning Window
- SR101-DS – Double-Sliding Window
- SR101-F – Fixed Glass Window
- SR101-SE – SE-Series Sliding Window
- SR101-SER – Rear-Opening Sliding Window
- 2007–2026 Mercedes-Benz Sprinter
- 144" or 170" Wheelbase
- Low Roof or High Roof
- Passenger Side Sliding Door Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the sliding door when possible.
- File and deburr the cut edges so there are no sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the sliding door cavity.
- Dry-fit the actual SR101 window and verify complete clearance before applying automotive urethane.
- Verify sliding-door clearance and travel where aftermarket flares, capsules, or other exterior accessories are present.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual Sprinter configuration and exact SR101 window before cutting. The illustrated cut area is intended as a visual reference and not as an exact cutting template.
FAQ
What vehicles does this window fit?
Mercedes-Benz Sprinter Van 2007-2026, 144 or 170 wheelbase, low roof or high roof, passenger side sliding door position. May not work with some flare extensions.
What are the measurements?
Overall: 55.20 in x 30.6 in (1402 mm x 777 mm). Awning vent opening: 35.83 in x 18.90 in (910 mm x 480 mm). Internal frame depth: 2 9/16 in (65 mm).
What tint is used?
Solar privacy glass with a 17% UV rating (blocks 83% UV).
Does it include a screen and shade?
Yes. It includes an integrated retractable bug screen and an integrated pleated retractable shade.
How is it installed?
Urethane bonded installation.
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 144" or 170" |
| Model Years | 2007–2026 |
| Roof Height | Low Roof or High Roof |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.