Description
Trim-Lok Edge Molding for 2012–2021 Nissan NV1500, NV2500 & NV3500 Full-Size Van Rear Cargo Door Window Opening
Finish your van window installation with a clean, professional appearance using this Trim-Lok Edge Molding for the Nissan NV Full-Size Van rear cargo door window opening. Designed specifically for 2012–2021 Nissan NV1500, NV2500, and NV3500 vans, this black textured edge trim is supplied in a 12 ft length and is designed to cover the exposed sheet metal edge created when cutting the rear cargo doors for a urethane-bonded window installation.
While edge molding is not required for a successful window installation, it is a popular finishing accessory used by professional van upfitters, camper van builders, and DIY installers looking to achieve a cleaner, more professional appearance. The molding helps conceal exposed metal, rough cuts, paint imperfections, and uneven cut lines while creating a finished transition between the van wall and the installed window.
Important: Edge molding is intended to be installed before the window is bonded into place. Because the trim covers the cut edge itself, installation becomes extremely difficult once a urethane-bonded window has been installed. For best results, install the molding immediately after completing the cutout and prior to applying urethane or setting the glass.
Product Details
- Vehicle Fitment: 2012–2021 Nissan NV1500, NV2500 & NV3500
- Position: Rear Cargo Door Window Opening
- Length: 12 ft
- Grip Range: 1/8"
- Color: Black
- Finish: Textured
- Material: Flexible PVC Edge Trim
- UV Resistant: Yes
- Weather Resistant: Yes
- Installation Type: Push-On Edge Molding
- Application: Covers exposed cut edges after creating a rear cargo door window opening
Designed for Nissan NV Window Installations
This Trim-Lok edge molding is designed to cap over the exposed metal edge created when cutting the rear cargo doors for an aftermarket window installation. The flexible design covers both the inner and outer wall skins, helping create a cleaner, more finished appearance around the window opening.
- Covers exposed sheet metal cut edges
- Improves the overall appearance of window installations
- Helps hide rough cuts and minor imperfections
- Reduces visibility of bare metal around the opening
- Creates a cleaner finished look inside the cargo area
- Ideal for camper van, cargo van, commercial van, and fleet conversions
Installation Notes
Trim-Lok edge molding simply presses onto the cut edge of the sheet metal opening. Since the molding is designed to cover the cut edge itself, installation should be completed before the window is installed.
In some applications, adhesive foam, insulation, or interior panel material may extend too close to the cut edge. Trimming those materials back slightly can help the molding seat properly and create a cleaner finished appearance.
Minor trimming may be required depending on cutout dimensions and installation methods. Always test fit prior to final installation.
Why Use Trim-Lok Edge Molding?
Whether you're installing fixed glass, sliding windows, awning windows, bunk windows, or custom camper van windows, Trim-Lok edge molding provides an easy and affordable way to create a more professional-looking installation. It is commonly used by camper van builders, RV manufacturers, mobile service companies, commercial fleet upfitters, and DIY van conversion enthusiasts throughout North America.
