Description
Sprinter Driver Side Middle Fixed Glass Window (170 WB) | VWD SL102-F
Factory look. Solid fixed glass. Direct-fit for the Sprinter driver's-side middle position on 170-wheelbase vans. Grey solar privacy glass for cleaner visibility with real privacy.
Key Features
- Solid fixed glass OE-style window
- Position: driver side middle
- Fitment: Mercedes Sprinter 170" wheelbase
- Grey solar privacy glass
- 17% UV filter rating helps reduce heat and UV exposure
- Tempered automotive safety glass (DOT/SAE)
- Urethane-bonded installation for a sealed, factory-style finish
- Usually ships in 5 days or less
- 1-year warranty
Fitment
- Vehicle: Mercedes-Benz Sprinter Van
- Window position: Driver Side Middle
- Wheelbase: 170"
- Model years: 2007–2026
- Roof height: Low Roof or High Roof
- Not compatible with vans with driver-side sliding doors
Technical Specifications
| SKU | SL102-F |
| Window Type | Solid Fixed Glass OE Style Van Window |
| Vehicle | Mercedes-Benz Sprinter Van |
| Window Position | Driver Side Middle |
| Wheelbase | 170" |
| Model Years | 2007–2026 |
| Roof Height | Low Roof or High Roof |
| Glass | Grey Solar Privacy Glass |
| UV Filter Rating | 17% |
| Safety | Tempered Automotive Safety Glass (DOT/SAE) |
| Installation | Urethane Bonded |
| Warranty | 1 Year |
Measurements
Measurements: 1421mm x 767mm (55.95" x 30.2")
Installation
This is a urethane-bonded window. Dry-fit first. Prep the opening, treat the cut edge, clean, and prime per urethane specs. Set the window with automotive urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.
Mercedes Sprinter SL102 Installation Overview
Installation of the SL102-F driver side middle fixed glass window requires removal of a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SL102-F – Fixed Glass Window
- 2007–2026 Mercedes-Benz Sprinter
- 170" Wheelbase
- Low Roof or High Roof
- Driver Side Middle Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the van when possible.
- File and deburr the cut edges so there are no sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the wall cavity.
- Dry-fit the actual SL102-F window and verify complete clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual Sprinter configuration and exact SL102-F window before cutting. The illustrated cut area is intended as a visual reference and not as an exact cutting template.
FAQ
What vehicles and positions does SL102-F fit?
Mercedes-Benz Sprinter van. Position: driver's side middle. Fitment listed for 2007–2026 Sprinter vans with 170" wheelbase and low roof or high roof. Not for vans with a driver's side sliding door.
What are the measurements?
Measurements: 1421 mm x 767 mm (55.95 in x 30.2 in).
What glass and UV rating does it use?
Grey solar privacy glass with a 17% UV filter rating.
Is the glass safety-rated?
Yes. Tempered automotive safety glass built to DOT/SAE standards.
How is it installed?
Urethane-bonded installation using automotive glass urethane. Prep and prime per urethane specs, set the glass, and support during cure.
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 170" |
| Model Years | 2007–2026 |
| Roof Height | Low Roof or High Roof |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.
