Universal Driver Side Bunk Half Slider Window | VWD BUNK3110L SE-Series (31.10 x 9.84)

The VWD BUNK3110L is a compact half-slider designed for tight spaces that still require airflow. Perfect for upper bunks, bed areas, cabinets, and small wall sections where a full-size window will not fit. All-glass exterior look, solar privacy glass (17% tint), built-in bug screen, and a urethane-bonded install for a sealed finish.

Key Features

• Universal bunk half slider window for flat panels
• All-glass exterior look
• Solar privacy glass (17% tint)
• Built-in bug screen
• Spring-loaded latch
• Urethane-bonded installation
• Manufactured in China
• 1-year warranty

Fitment

• Universal: installs on flat metal panels that meet the cutout size requirements
• Common installs: bunk/bed areas, upper wall sections, cabinets, trailers, box trucks, RV conversions
• Position: Driver Side (universal placement based on your layout)

Technical Specifications

Installation

This is a urethane-bonded window. Use the included cutout template, verify clearances behind the panel, then cut the opening. Prep the metal, dry-fit, clean, prime, and set with automotive glass urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.

FAQ

Will this fit my van?

This is a universal bunk window for flat panels. If the mounting area is larger than the required cutout size, it will fit. Always verify clearance behind the panel before cutting.

What are the measurements?

Overall window size: 790 mm x 250 mm (31.10 in x 9.84 in). Required wall cutout: 738 mm x 200 mm (29.05 in x 7.87 in). Sliding vent opening: 295 mm x 105 mm (11.61 in x 4.13 in).

Does it open and include a screen?

Yes. It is a half-slider window with a built-in bug screen and a spring-loaded latch.

What tint is used?

Solar privacy glass with 17% tint.

How is it installed?

Urethane-bonded installation using automotive glass urethane.