Description
Trim-Lok Edge Molding for 2002–2006 Mercedes Sprinter Driver Side Middle Window Opening - 158" Wheelbase
Finish your van window installation with a clean, professional appearance using this Trim-Lok Edge Molding for the 2002–2008 Mercedes Sprinter driver side middle window opening. Designed for 158" wheelbase Sprinter vans, this black textured edge trim is supplied in a 12 ft length and is intended to cover the exposed sheet metal edge created when cutting the van body for a urethane-bonded window installation.
While edge molding is not required for the structural installation of a van window, it is one of the most popular finishing accessories used by professional upfitters, camper van builders, and DIY installers. The molding helps conceal exposed sheet metal, rough cuts, paint imperfections, and uneven cut lines while providing a cleaner transition between the van wall and the installed window.
Important: Edge molding is designed to be installed before the window is bonded into place. Because the trim covers the cut edge itself, installation becomes extremely difficult after a urethane-bonded window has been installed. For best results, install the molding immediately after completing the cutout and prior to applying urethane or setting the glass.
Product Details
- Vehicle Fitment: 2002–2006 Mercedes Sprinter
- Wheelbase: 158"
- Position: Driver Side Middle
- Length: 12 ft
- Grip Range: 1/8"
- Color: Black
- Finish: Textured
- Material: Flexible PVC Edge Trim
- UV Resistant: Yes
- Weather Resistant: Yes
- Installation Type: Push-On Edge Molding
- Application: Covers exposed cut edges after creating a window opening
Designed for Sprinter Van Window Installations
This Trim-Lok edge molding is designed to cap over the exposed metal edge created when cutting the side panel for an aftermarket van window. The flexible design covers both the inner and outer wall skins, helping create a cleaner and more professional appearance around the window opening.
- Covers exposed sheet metal cut edges
- Improves the appearance of window installations
- Helps hide rough cuts and minor imperfections
- Reduces visibility of bare metal around the opening
- Creates a cleaner finished look inside the van
- Ideal for camper van, RV, commercial van, and cargo van conversions
Installation Notes
Trim-Lok edge molding simply presses onto the cut edge of the sheet metal opening. Since the molding is designed to cover the cut edge itself, installation should be completed before the window is installed.
In some applications, adhesive foam, insulation, or interior wall materials may extend too close to the cut edge. Trimming those materials back slightly can help the molding seat properly and provide a cleaner finished appearance.
Minor trimming may be required depending on cutout dimensions and installation methods. Always test fit prior to final installation.
Why Use Trim-Lok Edge Molding?
Whether you're installing fixed glass, sliding windows, awning windows, bunk windows, or custom camper van windows, Trim-Lok edge molding provides an easy and affordable way to create a more professional-looking installation. It is commonly used by van conversion companies, RV builders, fleet upfitters, and DIY Sprinter enthusiasts throughout North America.
