Universal Sliding Van Bunk Window (16-3/4" x 16-3/4") | VWD DTBUNK011-INT

Universal fit. Check measurements before ordering. Solar privacy glass. Compact slider ventilation for bunk areas and tight wall spaces.

Key Features

• Universal fit (YMM search does not apply). Confirm using the measurements below.
• Opening direction: driver side rear opening/passenger side front opening
• Solar privacy glass
• UV rating: 15%
• Installation type: urethane bonded
• Manufactured in Turkey
• Usually ships in 5 days or less
• Warranty: 1 year

Fitment

• Fitment: Universal (check measurements)
• Use case: bunk areas, camper vans, and compact wall locations
• Opening direction: driver side rear opening/passenger side front opening

Technical Specifications

Measurements

Bunk Window Outer Dimensions: 16-3/4" x 16-3/4"
Bunk Window Cut-Out Dimensions: 14-1/4" W x 14-1/2"
Vent Opening Size: 5-1/2" x 11-1/2"

Installation

This is a urethane-bonded window. Dry-fit first. Prep the opening, treat the cut edge, clean, and prime per urethane specs. Set the window with automotive urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.

FAQ

Is DTBUNK011-INT a vehicle-specific window?

No. DTBUNK011-INT is a universal-fit bunk window. Year/Make/Model search does not apply. Confirm fitment by matching the cut-out and outer dimensions to your van wall opening.

What direction does the slider open?

Driver side: rear opening. Passenger side: front opening.

What are the measurements?

Outer dimensions: 16-3/4" x 16-3/4". Cut-out dimensions: 14-1/4" W x 14-1/2". Vent opening size: 5-1/2" x 11-1/2".

What glass and UV rating does it use?

Solar privacy glass with a 15% UV rating.

How is it installed?

Urethane-bonded installation using automotive glass urethane. Dry-fit first, prep and prime per urethane specs, set the window, and support during cure.