VWD Universal Camper Van Split-Awning Window (O.D - 33.94" x 19.41") | AW3218S

Universal Split Awning Camper Van Window | VWD AW3218S (OD 33.94 x 19.41)

Camper vans need a window that seals confidently on big uninterrupted sheet metal. The VWD AW3218S split-awning was built for that. It gives you all-weather ventilation, privacy, and a clean exterior look. Clamp ring mounting keeps it secure and serviceable.

Key Features

• Split-awning design for all-weather ventilation
• Solar privacy glass
• Removable fiberglass bug screen
• Clamp ring installation for flat panel vans
• Clean exterior styling for pro builds
• 1 year warranty

Fitment

• Universal: installs on flat metal or fiberglass panels that meet the cutout size requirements
• Common installs: Chevrolet Express, GMC Savana, Ford Econoline/E-Series
• Also used on: Sprinter, Transit, ProMaster when a universal size is preferred
• Placement: driver or passenger side based on your layout

Technical Specifications

Learn more about UV transmission ↗

Installation

Clamp-ring sealing: All clamp-ring installations use the foam seals supplied with the windows. If the seal is not pre-applied, fit the supplied foam seal to the exterior frame as directed for the model. Tighten the mounting screws evenly to compress the seal uniformly.

This window uses a clamp ring installation. Choose a flat section of wall and avoid seams or heavy ribs. Confirm interior clearance for the clamp ring and screen. Mark and cut the opening to the cutout dimensions. Treat bare metal edges. Set the window with the seal on the exterior. Install the clamp ring from the inside and tighten evenly in a crisscross pattern until the seal compresses uniformly.

FAQ

Will this fit my van?

This is a universal window for flat panels. If your mounting surface is flat and you can create the required cutout size, it will fit. Always confirm clearance behind the panel and avoid crossing body seams or major ribs.

What are the measurements?

Outer frame: 863 mm x 493 mm (33.94 in x 19.41 in). Cutout: 830 mm x 455 mm (32.68 in x 17.91 in). Large vent opening: 800 mm x 185 mm (31.50 in x 7.28 in).

Why choose a split-awning design?

Split-awning ventilation helps with controlled airflow and improves stability on wide flat sheet metal areas. It also keeps rain out while allowing continuous ventilation.

Does it include a screen?

Yes. It includes a removable fiberglass bug screen for pest-free airflow.

How is it installed?

Clamp ring installation. The interior ring compresses the seal against the exterior frame for a tight, watertight fit. Designed for 1/8 in (3.18 mm) wall depth.