VWD Sprinter Driver Forward Crank-Out Awning Window | SL101-CA
In stock
Window availability. Add-on availability depends on your selections.
Ships in 3–5 Business Days
Pickup ready in 1–3 Business Days
Select your vehicle to check fitment before ordering.
VWD Sprinter Driver Forward Crank-Out Awning Window | SL101-CA is backordered and will ship as soon as it is back in stock.
Shipping, made simple
Estimate shipping for this item
Compare shipping for your current cart with shipping after adding the selected quantity and installation options.
Estimates are based on your current selection and destination. Discounts, taxes and duties are confirmed at checkout.
The VWD Special offers a $399.99 USD maximum shipping option for eligible orders to the contiguous 48 states and Washington, DC. Combine your windows and accessories in one order to take advantage of the maximum. If your calculated shipping is lower, choose the lower rate.
View cart & combined shipping
VWD Sprinter Driver Forward Crank-Out Awning Window | SL101-CA
VWD Sprinter Driver Forward Crank-Out Awning Window | SL101-CA is backordered and will ship as soon as it is back in stock.
Description
Description
Sprinter Driver Side Forward Crank-Out Awning Window | VWD SL101-CA (2007-2027)
The VWD SL101-CA is the stealth ventilation upgrade for the Sprinter driver's side forward panel. You get controlled airflow without the wide-open look of a large slider. Solar privacy glass . The crank-out awning opens up to 3 inches for precise fresh-air control.
Key Features
- Direct-fit for Sprinter driver's side forward panel
- Crank-out awning ventilation with stable open positions
- Opens up to 76mm (3 in) for airflow control
- Solar privacy glass
- Integrated insect screen
- Low-profile exterior appearance
- Urethane-bonded installation
- Manufactured in China
- 1 year warranty
Fitment
- Mercedes-Benz Sprinter 2007-2027
- 144, 170, and 170 EXT wheelbases
- Low Roof and High Roof
- Position: Driver Side Forward panel
Technical Specifications
| Model | SL101-CA |
|---|---|
| Window Type | Crank-Out Awning |
| Overall Size | 1402 mm x 777 mm (55.20 in x 30.6 in) |
| Awning Opening | 803 mm x 450 mm (31.61 in x 17.72 in) |
| Crank-Out Distance | Up to 76 mm (3 in) |
| Glass | Solar privacy glass |
| Glass | Solar privacy glass |
| Screen | Integrated insect screen |
| Window Position | Driver Side Forward |
| Installation | Urethane Bonded |
| Manufactured In | China |
| Warranty | 1 Year |
| Glass Thickness | 4 mm |
| UV Transmission | 17% |
Learn more about UV transmission ↗
Installation
This is a urethane-bonded window. Prep the cutout, dry-fit, clean, prime, and set with automotive glass urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.
Mercedes Sprinter SL101 Installation Overview
Installation of the SL101 driver-side forward windows requires removal of a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SL101-AW – Premium Awning Window
- SL101-CA – Crank-Out Awning Window
- SL101-DS – Double-Sliding Window
- SL101-F – Fixed Glass Window
- SL101-SE – SE-Series Sliding Window
- SL101-SER – Rear-Opening Sliding Window
- 2007–2027 Mercedes-Benz Sprinter
- Driver Side Forward Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the van when possible.
- File and deburr the cut edges to remove any sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the wall cavity.
- Dry-fit the actual SL101 window and verify complete clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual Sprinter configuration, wheelbase, and exact SL101 window before cutting. The illustrated cut area is for reference only and is not an exact cutting template.
FAQ
What vehicles does this window fit?
Mercedes-Benz Sprinter 2007-2027, 144, 170, and 170 EXT wheelbases, Low Roof and High Roof. Driver Side Forward panel.
What are the measurements?
Overall size: 1402 mm x 777 mm (55.20 in x 30.6 in). Awning opening: 803 mm x 450 mm (31.61 in x 17.72 in). Crank-out distance: up to 76 mm (3 in).
Can it stay open in the rain?
Yes. The bottom-hinged awning design helps shield the opening from direct rainfall while allowing ventilation.
Does it include a screen?
Yes. It includes an integrated insect screen for pest-free airflow.
How is it installed?
Urethane-bonded installation using automotive glass urethane.
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 144" or 170" |
| Model Years | 2007–2027 |
| Roof Height | Low Roof or High Roof |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.
Installation & Support
Match the exact SKU, vehicle configuration and installation method before cutting. Overall glass dimensions are not a cutout template. Dry-fit the actual window and follow the model-specific instructions.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
