Description
Transit Driver Side Middle Fixed Glass Window | VWD TL202-F
Factory look. Solid fixed glass. Direct-fit for the Ford Transit driver's side middle position. Grey solar privacy glass for a cleaner view with real privacy.
Key Features
- Solid fixed glass OE-style window
- Position: driver side middle
- Grey solar privacy glass
- 17% UV filter rating helps reduce heat and UV exposure
- Tempered automotive safety glass (DOT/SAE)
- Urethane-bonded installation for a sealed, factory-style finish
- Usually ships in 5 days or less
- 1 year warranty
Fitment
- Vehicle: Ford Transit Van
- Window position: Driver Side Middle
- Model years: 2015–2026
- Wheelbase: 148", 148" Extended
- Roof height: Medium Roof or High Roof
Technical Specifications
| SKU | TL202-F |
| Window Type | Solid Fixed Glass OE Style Van Window |
| Vehicle | Ford Transit Van |
| Window Position | Driver Side Middle |
| Glass | Grey Solar Privacy Glass |
| UV Filter Rating | 17% |
| Safety | Tempered Automotive Safety Glass (DOT/SAE) |
| Installation | Urethane Bonded |
| Warranty | 1 Year |
Measurements
Overall Dimensions: 980mm x 730mm (Top 38-7/8 and Bottom 38 5/8″ × 28 3/4″)
Installation
This is a urethane-bonded window. Dry-fit first. Prep the opening, treat the cut edge, clean, and prime per urethane specs. Set the window with automotive urethane. Tape and support during the cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.
Ford Transit TL202-F Installation Overview
Installing the TL202-F driver-side middle fixed glass window requires removing a portion of the inner stamped sheet metal on compatible Ford Transit Medium Roof and High Roof vans.
This installation applies to:
- TL202-F – Driver Side Middle Fixed Glass Window
- 2015–2026 Ford Transit
- 148" and 148" Extended Wheelbases
- Medium Roof and High Roof
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the van when possible.
- File and deburr the cut edges to remove sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the wall cavity.
- Dry-fit the TL202-F window and verify clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual TL202-F window and vehicle before cutting. The illustrated cut area in our guide is a visual reference, not an exact cutting template.
FAQ
What vehicles and positions does TL202-F fit?
Ford Transit van. Position: driver's side middle. Fitment listed for 2015–2026 Transit vans with medium roof or high roof and 148" or 148" extended wheelbase.
What are the measurements?
Overall dimensions: 980mm x 730mm (38 5/8″ × 28 3/4″.)
What glass and UV rating does it use?
Grey solar privacy glass with a 17% UV filter rating.
Is the glass safety-rated?
Yes. Tempered automotive safety glass built to DOT/SAE standards.
How is it installed?
Urethane-bonded installation using automotive glass urethane. Prep, prime per urethane specs, set the glass, and support during cure.
Ford Transit Van
| Model | Transit Van |
|---|---|
| Wheelbase | 148", 148" Extended |
| Model Years | 2015–2026 |
| Roof Height | Medium Roof or High Roof |
Compatible with Ford Transit vans within the configurations listed above.
