Universal van windows give builders more choices when a vehicle-specific body window does not suit the layout. They are selected by dimensions, mounting requirements and the available wall space.
Universal does not mean automatic fit. Compare the cutout, outside dimensions, wall thickness, panel curvature and opening clearance before choosing a half-slider, awning or compact window.
Plan the window set before cutting
Mark the bed, kitchen, seats and storage on the interior layout. Compare where you want a view with the places that need access to fresh air, then account for controls, screens and wall finishing.
Choose every window by its actual application and installation requirements. A coordinated set can use different opening styles in different positions; one style does not have to serve the entire van.
Dimensions and model details from the original guide
These details identify the models discussed in the original article. Confirm the current listing and installation template before using any measurement for a cutout.
| Window Type | Best For | Main Advantage |
|---|---|---|
| Universal Van Windows | Custom layouts, bunk areas, compact spaces, trailers, non-standard openings | Flexible placement |
| Vehicle-Specific Van Windows | Factory-style locations on Sprinter, Transit, and ProMaster vans | Designed for specific van body positions |
| Awning Van Windows | Ventilation in sleeping or living areas | Outward-opening airflow |
| Sliding Van Windows | Adjustable airflow and easy operation | Simple ventilation control |
| Fixed Glass Van Windows | Natural light and clean appearance | Simple, sealed glass design |
Current model details to compare
Compare the model details below, then open the product page to confirm the fitment, included components and installation requirements for your build.
VWD Awning Van Bunk Window (OD 34-3/4" x 11-3/4") | AW3310
| Cut-Out Dimensions | 33-5/8" x 10-5/8" |
|---|
Use the supplied template to size the cutouts. This window is measured by exterior frame dimensions.
VWD Sliding Van Bunk Window (16-3/4" x 16-3/4") (driver side front opening/passenger side rear opening) | DTBUNK012-INT
| SKU | DTBUNK012-INT |
|---|---|
| Window Type | Sliding Van Bunk Window |
| Fitment | Universal Fit (Check Measurements) |
| Installation | Urethane Bonded |
Bunk Window Outer Dimensions: 16-3/4" x 16-3/4" Bunk Window Cut-Out Dimensions: 14-1/4" W x 14-1/2" Vent Opening Size: 5-1/2" x 11-1/2"
VWD Passenger Side Half-Slider Bunk Window, 34" x 11" | VW3310R
| Window Type | Half Slider Bunk Window |
|---|---|
| Cut-Out Dimensions | 33 in x 10 in |
| Installation | Clamp Ring (1/8 in wall thickness) |