The VWD Journal · Universal
You do not need a huge van to make a weekend feel expansive.
Sometimes the best escape is close to home: two nights away, a favorite campground, and enough space to stretch out with someone you love. In a compact camper, every opening and shelf matters. A small window beside the bunk can bring daylight, a view, and a sense of connection to a corner that might otherwise feel tucked away from the trip.
Featured window: DTBUNK011-INT · Universal
A compact square slider for a measured nook
The DTBUNK011-INT is a universal sliding bunk window with listed outer dimensions of 16-3/4 by 16-3/4 inches. Solar privacy glass and urethane-bonded installation make it an option to consider for a compact wall section where the measurements and mounting conditions suit.
Opening direction matters to the layout: the listing describes a rear opening on the driver side and a front opening on the passenger side. Check that arrangement against the bed, storage, and control access you are planning so the finished nook is comfortable to use.
Make the little room feel intentional
Lie down in the proposed sleeping position and check where the view appears. A small square of trees or sky can be lovely when it sits in the right place. Keep the pillow and bedding from crowding the controls, and choose an interior covering that works with your preferred nighttime privacy.
The product listing gives separate outer, cutout, and vent-opening dimensions. Review all three, confirm the wall contour and installation requirements, and dry-fit the actual window before making the opening. A careful plan is especially rewarding in a small build, where every inch has a job.
A weekend home you look forward to using
You might spend the morning walking a trail and the afternoon reading with your feet up. The van becomes a familiar place to return to, with the campsite still visible beside you. Use the slider for ventilation when parked in suitable conditions, and consider the rest of your airflow setup as part of the complete room.
Follow the model's operating and care instructions and secure the slider before driving. Then pack the favorite blanket, bring something good for breakfast, and give yourselves a weekend that feels a little larger than the map suggests.
Find your DTBUNK011-INT
VWD Sliding Van Bunk Window (16-3/4" x 16-3/4") (driver side rear opening/passenger side front opening) | DTBUNK011-INT. Review current fitment, included features, and installation options for your exact build.
A few helpful details
What size is DTBUNK011-INT?
Listed outer dimensions are 16-3/4 by 16-3/4 inches. The cutout and vent opening have different dimensions; check the current product page and actual window.
How is this universal bunk window installed?
The DTBUNK011-INT uses urethane-bonded installation. Follow its model guidance and the adhesive system's preparation and cure requirements.
VWD has your back
We want the small window to bring a lot of happy weekends. VWD has your back with help choosing the application and understanding the product guidance. If you encounter a snag, reach out. Let's help you work toward getting your cozy corner ready to enjoy again.